Engine & transmission
- Engine oil temperature
- Coolant temperature
- Transmission temperature
- Engine oil level
Vehicle-Specific Displays / Discovery 4 · LR4
LAND ROVER / DISCOVERY 4 · LR4
A familiar place.
A whole new view.
A direct replacement for your Discovery 4’s original clock. The same position, dimensions and plug — with vehicle data and a classic clock in one display.
Plug and Play · Direct clock replacement
Made for Discovery 4Original clock position and dimensions
Plug and PlayNo cutting or splicing factory wiring
OBD connection · CAN dataSupplied scanner reads vehicle signals
ON THE DISPLAY
Your Discovery. At a glance.
Explore the display in a real Discovery 4 installation.
A classic clock, reimagined.
An analog-style clock within the original console layout.
Four corners. One clear view.
See the four corner height readings together.
Know your terrain mode.
See Terrain Response mode changes on the display. Grass / gravel is shown here.
A view of your vehicle’s attitude.
A dedicated pitch and roll display.
Keep transmission temperature in view.
A dedicated temperature reading in degrees Celsius.
Make the view your own.
Personalize your display with a custom wallpaper.
Photos show example readings. Available vehicle data depends on the vehicle’s equipment and CAN signals.
VEHICLE DATA & FEATURES
More of your Discovery. In view.
Monitor vehicle data, see terrain mode changes and make the display your own.
Air suspension
- Air suspension height at all four wheels
- Air suspension compressor temperature
- Suspension air system pressure
Terrain & vehicle attitude
- Terrain Response mode change notifications
- Vehicle pitch angle
- Vehicle roll angle
Everyday essentials
- Clock display
- Custom wallpaper
- Read engine OBD fault codes
- Clear engine OBD fault codes
Available vehicle data depends on your Discovery 4’s equipment and CAN signals. Fault-code reading and clearing applies to engine OBD codes.
8 ADDITIONAL READOUTS
More vehicle data. Your choice.
Your LR4 now offers eight additional readings. Choose which gauges appear using the app.
Engine & road
- Engine RPM
- Vehicle speed
- Manifold absolute pressure (MAP)
- Intake air temperature
Load & drivetrain
- Engine load
- Throttle position
- Ignition angle
- Estimated gear
Estimated gear is calculated. Available readings depend on vehicle support and configuration.
THE DAOMOTION APP
Your Discovery 4 / LR4. Set up your way.
Choose the readings on your display, start navigation and follow the installation guide — all from the DAOmotion app.
Choose your readings
Select the gauges and units you want in the app. Use the Device / Configuration controls above the phone to view both screens.
Navigation on your display
Start in the app. Open the navigation screen on your display, then connect to see the next turn. Switch back to your gauges when needed.
App screens and display readings are illustrative. Available features depend on your device and vehicle configuration.
ENGINE DIAGNOSTICS
Read the code.
Clear it from your display.
Check engine OBD fault codes, view the details and send a clear request directly from the round display.
Three steps. On the display.
- Read & review
Open Engine Codes, then View Details to review the reported engine codes.
- Clear & confirm
Choose Clear Code. Park safely with the engine off and ignition on, then select Confirm.
- Check the result
The display reads the codes again so you can see what remains after the request.
For engine OBD codes. Clearing resets diagnostic data and readiness monitors; it does not repair the cause. Permanent codes remain until the vehicle confirms the fault is resolved.
IN THE BOX
One kit. Ready to connect.
Discovery 4 display
Directly replaces the original clock, using the same position, dimensions and connector.
OBD scanner
Connects to the vehicle’s OBD port to receive CAN data.
Scanner photo is illustrative.
Installation Guide
Explore the hardware installation and App setup before choosing your kit.
YOUR KIT
Discovery 4
Center-Console Display
Display + OBD scanner · CAN vehicle data
Plug and Play with matching factory connectors.
$459.90 USD
Free shipping to the contiguous 48 United States. Alaska, Hawaii, US territories and other destinations: shipping paid by the buyer at checkout.